Nortel Networks NN43011-110 Manual Do Utilizador
33
Fiber-optic and IP expansion
Contents
This section contains information on the following topics:
Small System expansion
Both the Cabinet system and the Chassis system support fiber-optic and IP
expansion. Up to four Expansion Cabinets or Chassis can be connected
to the Main with CAT5 or 100BaseF cable and located up to 3 km (1.8 mi)
from the Main. With the introduction of IP connectivity, IP expansion can be
distributed over a Campus Data Network.
expansion. Up to four Expansion Cabinets or Chassis can be connected
to the Main with CAT5 or 100BaseF cable and located up to 3 km (1.8 mi)
from the Main. With the introduction of IP connectivity, IP expansion can be
distributed over a Campus Data Network.
For fiber-optic expansion, the following three basic components, in addition
to other hardware, are required:
to other hardware, are required:
•
Small System Controller (SSC) card in the Main
•
Fiber Expansion daughterboard
•
Fiber Receiver card in the Expansion
For IP expansion, the following three basic components, in addition to other
hardware, are required:
hardware, are required:
•
SSC card in the Main
•
IP Expansion daughterboards (minimum two)
•
SSC card in the Expansion
For a complete list of required hardware, refer to
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Overview
NN43011-110
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2003 - 2007, Nortel Networks
.