Nortel Networks Option 11C Mini Manual Do Utilizador
Page 102 of 332
Chapter 7 — Important safety instructions
553-3021-209
Standard 3.00
April 2000
Safety instructions when installing telephone equipment
The following are safety instructions for installing telephone equipment:
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is designed
for wet locations.
for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line is disconnected at the network interface.
telephone line is disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
Safety instructions when using telephone equipment
Always follow basic safety precautions when using telephone equipment.
Following these safety precautions reduces the risk of fire, electric shock, and
injury to persons, including the following:
Following these safety precautions reduces the risk of fire, electric shock, and
injury to persons, including the following:
•
Follow all warnings and instructions marked on the product.
•
Before you clean a telephone, remove
the plug from the wall outlet. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
•
Do not use the telephone near water (for example, near a tub or sink).
•
Do not place the telephone on a piece of furniture that is unstable. The
telephone can fall, causing serious damage to the telephone.
telephone can fall, causing serious damage to the telephone.
•
Slots and openings in the cabinet and the back or bottom of the telephone
are for ventilation. These ventilation slots protect the telephone from
overheating. Never block or cover these openings.
are for ventilation. These ventilation slots protect the telephone from
overheating. Never block or cover these openings.
Never block the openings on a telephone by placing the product on a
surface like a bed, sofa, or rug. Never place the product near or over a
radiator or heat register. Do not place the product in a built-in
installation, unless there is correct ventilation.
surface like a bed, sofa, or rug. Never place the product near or over a
radiator or heat register. Do not place the product in a built-in
installation, unless there is correct ventilation.
•
Only operate the product from the type of power source indicated on the
marking label. If you are not sure of the type of power supply, check with
your distributor.
marking label. If you are not sure of the type of power supply, check with
your distributor.