Nortel Networks 4050 Manual Do Utilizador
Chapter 8 Managing system users and groups 383
Nortel Secure Network Access Switch 4050 User Guide
2
Click Add.
The Add a User Group dialog box appears (see
).
Figure 103
Add a User Group
3
Enter the User Group information in the applicable fields.
describes
the Add a User Group fields.
4
Click Add.
The new user group appears in the table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing a user group
To remove an existing user group from the User Group Table, perform the
following steps:
following steps:
1
Select the System > Manage Users > user > User Groups tab.
2
Select the group to remove from the User Group Table.
3
Click Delete.
A confirmation dialog appears.
4
Click Yes.
Table 74
Add a User Group fields
Field
Description
Name
Specifies the name of the group to which you are adding
the user. Options are oper, admin, certadmin.
the user. Options are oper, admin, certadmin.