Nortel Networks 4050 Manual Do Utilizador
Chapter 14 Maintaining and managing the system 751
Nortel Secure Network Access Switch 4050 User Guide
To reboot, shut down, or reset the Nortel SNAS 4050 device to which you are
connected, perform the following steps:
connected, perform the following steps:
1
Select the System > Boot > Reboot/Delete ISD Options tab.
).
Figure 231
Reboot/Delete ISD Options
2
To reboot the Nortel SNAS 4050 device to which you are connected, click
Reboot. When prompted, click Yes.
Reboot. When prompted, click Yes.
3
To shut down the Nortel SNAS 4050 device to which you are connected, click
Halt. When prompted, click Yes.
Halt. When prompted, click Yes.
Always use this command before turning off the device.
4
To reset the Nortel SNAS 4050 device to which you are connected, click
Delete. When prompted, click Yes.
Delete. When prompted, click Yes.