Nortel Networks 4050 Manual Do Utilizador
Appendix A CLI reference 809
Nortel Secure Network Access Switch 4050 User Guide
•
To display the active menu:
— Ensure that the command line is blank.
— At the menu prompt, press the Tab key.
Using a submenu name as a command argument
To display the properties related to a specific submenu, you can include the
submenu name as an argument to the
submenu name as an argument to the
cur
command (at a menu prompt one level
up from the desired submenu information).
For example, to display system information at the Configuration menu prompt,
without descending into the System menu (
without descending into the System menu (
/cfg/sys
), use the following
command:
>> Configuration# cur sys
>> Configuration#
cur sys
System:
Management IP (MIP) address = 192.168.128.211
iSD Host 1:
Type of the iSD = master
IP address = 192.168.128.213
License =
IPSEC user sessions: 250
Secure Service Partitioning
PortalGuard
TPS: unlimited
SSL user sessions: 250
Default gateway address = 192.168.128.3
Ports = 1 : 2
Hardware platform = 3070
Host Routes:
No items configured
Host Interface 1:
IP address = 192.168.128.213
Network mask = 255.255.255.0
VLAN tag id = 0
Mode = failover
Primary port = 0
Interface Ports:
1
Host Port 1:
Autonegotiation = on