Farallon Communications 412 Manual Do Utilizador

If the D channel LED indicates a proper connection to the ISDN 
switch by turning off and you are using Windows, you can use your 
communications software to establish an ISDN connection. Go to 
the next section to place calls using your ISDN modem.

If the D channel LED indicates a proper connection to the ISDN 
switch by turning off and you are using Windows 95, to complete 
the Windows 95 installation 

 

If the D channel LED indicates a proper connection to the ISDN 
switch by turning off and you are using Windows NT, to complete the 
installation 

To place calls using Windows, you can use any standard 
communications application that recognizes AT commands. 

Note: Most areas require you to dial ISDN calls with 11 digits (for 
example, 1-800-555-1212), even for local calls.

Note that you must use Multilink PPP to make calls using two ISDN 
B channels. For information. 

 

If you are using Windows 95, you need to install a modem driver for 
your ISDN modem before you can place calls. Follow the 
instructions below to install the Windows 95 modem driver.

Note: The serial por t speed of most PCs limits the computer’s 
maximum data transmission rate. Typically, PCs are limited to a 
maximum transmission speed of 115.2 Kbps. However, advanced 
serial cards and drivers are available to boost the serial por t speed 
up to 230.4 Kbps. (For more information,