Farallon Communications 412 Manual Do Utilizador

Because ISDN suppor ts two independent B channels, you can use 
each channel separately. You can use the Netopia configuration 
software to route calls on telephone numbers 1 and 2 to specific 
analog device por ts. By default, incoming calls to ISDN telephone 
numbers 1 and 2 ring both analog device por ts simultaneously.

Using the Netopia configuration software, check the box beside the 
phone por t(s) to which you want to route calls from telephone 
number 1 and telephone number 2. In the configuration software, 
the analog device por ts are called Phone Por t 1 and Phone Por t 2. 

You might want to use call routing to exclusively assign a telephone 
number to a device. For example, suppose you have an analog 
telephone attached to Phone Por t 1 and a fax machine attached to 
Phone Por t 2. To route incoming calls from telephone number 1 to 
the telephone and calls from telephone number 2 to the fax 
machine, you would do the following in the Netopia configuration 
software. In the Number 1 area, check the Phone Por t 1 check box 
and uncheck the Phone Por t 2 check box (this routes incoming calls 
on telephone number 1 to Phone Por t 1). In the Phone Number 2 
area, uncheck the Phone Por t 1 check box and check the Phone 
Por t 2 check box (this routes incoming calls on telephone number 2 
to Phone Por t 2).

FAX

Phone Numbers 1 & 2

      Phone #1

   Port 1        Port 2

      Phone #2

   Port 1        Port 2