GE EPM 7300 Manual Do Utilizador
153
Voltage
Phasor magnitude and angle for negative, positive and zero sequence voltages.
Voltage values derived from a source wired in a delta configuration will appear as
"N/A".
"N/A".
Protection Control Tab
Universal Relay - Protection Control Tab
The Protection Control tab is supported for the following devices: B30, C30, C60,
D60, F30, F35, F60, G60, L60, L90, M60 and T60. The Protection Control tab
provides the features described below.
D60, F30, F35, F60, G60, L60, L90, M60 and T60. The Protection Control tab
provides the features described below.
Grouped Protection Settings
There are eight identical groups of protection settings in the UR - this tab provides an
enable/disable status indication of selected protection elements, as well as a
pushbutton to change the enable/disable status of those elements in each group.
Function availability is determined by the Order Code read from the device – those
functions that are not available in the connected device will be grayed out and
disabled, as shown below:
enable/disable status indication of selected protection elements, as well as a
pushbutton to change the enable/disable status of those elements in each group.
Function availability is determined by the Order Code read from the device – those
functions that are not available in the connected device will be grayed out and
disabled, as shown below: