GE EPM 7300 Manual Do Utilizador

The Metering tab displays the following metered values from the 369 device: Actual
Values for Voltage, Current, Power, Power Factor, and Frequency. These values are
detailed below.

•  Per phase magnitude and angle

•  Phase average

•  Ground current

•  Motor Load as a percentage of the Full Load Current rating defined in setpoints.

•  Thermal Capacity used in percent

•  Estimated time to trip

•  Current Unbalance ratio

Voltage values are only displayed if the Metering or Backspin option is installed in
the relay, and if a voltage transformer (VT) connection has been programmed in the
relay.

Line - Line voltage magnitude.

Average Line-Line voltage.

Line – Neutral voltage magnitude and angle (only shown for wye configurations)