GE EPM 7300 Manual Do Utilizador
42
PMCS Interface Toolkit
Lockout/Tagout Wizard
Usage
The Lockout/Tagout provides a method for assigning danger or ground tag graphics
to various one-line diagrams or wizards.
to various one-line diagrams or wizards.
On-screen tags and indicators are for informational
purposes only and DO NOT represent real-world
conditions! Actual lockout status must be verified prior
to performing any work. Failure to follow appropriate
lockout procedures can result in SEVERE INJURY or
DEATH!
purposes only and DO NOT represent real-world
conditions! Actual lockout status must be verified prior
to performing any work. Failure to follow appropriate
lockout procedures can result in SEVERE INJURY or
DEATH!
The Wizard consists of a single screen (shown above) displaying the presence or
absence of danger and ground tags for a particular device. The user installs or
removes Danger and/or Ground Tags using the Install/Remove buttons on the Tag
Assignment window shown above. Any wizards belonging to the same Status Group
will display Danger and/or Ground Tag indicators mirroring the tags installed in the
Tag Assignment window.
absence of danger and ground tags for a particular device. The user installs or
removes Danger and/or Ground Tags using the Install/Remove buttons on the Tag
Assignment window shown above. Any wizards belonging to the same Status Group
will display Danger and/or Ground Tag indicators mirroring the tags installed in the
Tag Assignment window.
Supported Devices