Targus PACMB010U Manual Do Utilizador

NOTES:  The  Targus  drive  receives  its  power  from  your  computer’s  USB  ports.  You 

must  have  a  minimum  of  two  USB  ports  to  use  the  drive,  they  must  be  in  full 

compliance with the USB specifications and supply a minimum of 5V/500mA of power 

per port.

When connected to USB version 1.1 ports, the drive’s performance level will be less

than optimal. For best results, connect the drive to USB version 2.0 ports.

This drive will read DVD-ROMs as delivered, but in order to play DVD movies, you must 

have movie playback software (not included) installed on your system.

• Windows® Me/2000/XP

NOTES: Installing the Targus drive may change internal drive letter assignments.

You can connect the Targus drive to your computer via a hub or port replicator as long 

as the device has its own AC power adapter.

The Y-cable that connects the Targus drive to your computer has two 
USB type A connector ends, one single and one with a USB pass-
through.

The USB pass-through connector supports both up- and downstream 
data flow between your computer and any supported device connected 
to  it,  such  as  a  USB  mouse  or  port  replicator. The  single  connector 
supports both up- and downstream data flow between the Targus drive 
and your computer. Both connector ends provide power to the Targus 
drive.

CAUTIONS: Avoid connecting a high power device, such as a printer or scanner, to your 

computer  via  the  Y-cable’s  pass-through  end  as  the  device  may  not  work  properly 

and/or cause the Targus drive to stop working temporarily. For best results, connect 

only low power devices, such as a mouse or keyboard, to the passthrough end.

2