Mackie OPT-24 Manual Do Utilizador

Installa

tion Guide

9) Install the OPT•24 into the ACC1 PCI slot by carefully aligning the card’s gold-plated connector

edge to the PCI slot on the motherboard and pushing down gently but firmly until the card is fully
seated into the slot. It may help to gently rock the board front to back until the board is completely
seated.

 Make sure the loose connector ends are pointing up so they can be accessed for step 11.

REAR PANEL

FRONT PANEL

REAR PANEL

®

MACKIE DESIGNS. ™

© 2000

9) Install OPT•24 Board 
    into the ACC1 PCI slot

10) Install Screw into 
      the OPT•24 bracket

10) Install the screw that you removed from the blank cover plate to secure the OPT•24 to the HDR chassis.

11) Connect the short ribbon cables from the OPT•24 card to the adjacent Sync card by folding them over the

top of the Sync card (see illustration below and on next page).

REAR PANEL

FRONT PANEL

REAR PANEL

®

MACKIE DESIGNS. ™

© 2000

11) Connect the 2 short ribbon 
       cables to the Sync Card