Dialogic TX4000 PCI SS7 Manual Do Utilizador
Overview of the TX 4000 board
TX 4000 PCI SS7 Network Interface Board Installation Manual
Utilities and demonstration programs
NaturalAccess Signaling Software provides the following utilities and demonstration
programs for the TX 4000 board. Run these programs from the \Program
Files\Dialogic\tx\bin directory in Windows and from the /opt/dialogic/tx/bin directory
programs for the TX 4000 board. Run these programs from the \Program
Files\Dialogic\tx\bin directory in Windows and from the /opt/dialogic/tx/bin directory
in UNIX. For more information about each utility, refer to the Dialogic® TX Series
SS7 Boards TX Utilities Manual.
SS7 Boards TX Utilities Manual.
Utility
Description
cpcon
Uses NaturalAccess to manage communication with the TX board. This utility is an operator
console run from the command line.
console run from the command line.
If you want to bypass the NaturalAccess layer, use the cpcon_ utility to monitor the TX
operating system.
operating system.
cplot
Loads communications processor tasks to TX boards.
cpmodel Displays the board type for each installed TX board.
pcigetcfg Obtains bus and slot information during software installation (UNIX only).
txalarm
Uses NaturalAccess to display and optionally log alarm messages generated by NaturalAccess
Signaling Software tasks running on all TX boards.
Signaling Software tasks running on all TX boards.
If you want to bypass the NaturalAccess layer, use the txalarm_ utility to display and
optionally log alarm messages.
optionally log alarm messages.
txccode
Displays a text description of a completion code (error code) reported by a TX board.
txconfig
Configures TDM and IP based interfaces on TX 4000 boards. ss7load calls txconfig at board
boot time. For more information, refer to the Dialogic® NaturalAccess™ Signaling Software
Configuration Manual.
boot time. For more information, refer to the Dialogic® NaturalAccess™ Signaling Software
Configuration Manual.
txcpcfg
Assigns CP numbers to TX boards based on bus and slot.
txdiag
Provides diagnostic information about TX boards.
txdump
Dumps the contents of the shared memory used for communication between the TX board
and the host driver.
and the host driver.
txeeprom Displays information stored in the EEPROM.
txflash
Updates the operating system stored in the TX board Flash memory.
txinfo
Obtains detailed TX 4000 board information.
txlocate
Blinks the end bracket LEDs of a TX 4000 board.
txreset
Resets a TX board and reboots the board from the operating system image stored in Flash
memory.
memory.
txsnap
Generates a core dump of a TX 4000 board, creating a snapshot file.
txstats
Displays statistics maintained by the TX device driver.
12
Dialogic Corporation