Quantum Audio PX502 Manual Do Utilizador

 PX502 Tape Library Quick Start Guide

14

0

To set the library options:

1 Turn on the library by pushing power button located on 

the bottom left-hand corner of the OCP (see 

2 The OCP asks you: “Are the packaging materials 

removed?” (YES or NO).

3 Press YES to continue.
4 The OCP asks again: “Are you sure the packaging 

materials are removed?” (YES or NO).

5 Press YES to continue. The library continues the boot 

process. When complete, the Home screen displays.

6 Press Setup from the Home screen. The OCP displays 

the Setup screen (see 

Figure 21  Setup Screen

7 From the Setup screen, use the up and down arrows to 

highlight Cabinet and press Enter.
The Cabinet Setup screen displays (see 

Figure 22  Cabinet Setup Screen

8 The Cabinet Setup screen allows you to configure the 

):

Table 5   Setting Up the Cabinet

0

To set the date and time:

1 From the Setup screen, use the up and down arrows to 

highlight Date and Time and press Enter.
The Date and Time screen displays (see 

):

Figure 23  Date and Time Screen

The Date and Time screen displays the following 
information about the library:

Host bus

Sets the SCSI ID for both the 
library and tape drives.

Stack role

Assigns the library stack role 
as Master, Slave, or Stand 
alone (solo). There can be only 
one Master library in a 
multiple stack. Once 
configured as a slave, all 
library OCP functions can be 
controlled via the Master 
library OCP. The library model 
number will also change to 
PX500S indicating a stacked 
library configuration. The 
library model number is 
available from the home 
screen on the Master library 
OCP.

Left load port

Enables or disables the left 
load port

Right load port

Enables or disables the right 
load port

Drive FUP from tape

Allows you to perform a tape 
drive firmware update from a 
firmware update tape 
cartridge.