Yamaha CRW-70 Manual Do Utilizador

21

Insert the series A plug (with a rectangular cross section) of the USB 

cable provided in the USB port of the interface card.

When the CRW-70 drive and computer are connected, the busy LED 

flashes green and then lights up orange and “PC” shows on the display.

• Be sure to connect the drive to the USB port of the computer. If you connect the 

drive to the computer via a USB hub, the drive may not operate properly.

• If the CRW-70 drive is connected to a USB 1.1 port, which is one of the typical 

USB ports installed as standard on computers, the drive operates in accordance 
with USB 1.1 standard. (

As soon as the CRW-70 drive is connected to the computer, it automatically 

starts installing the device drivers. The device drivers only need to be 

installed once when the CRW-70 drive is connected to the computer for the 

first time.

Install the device driver provided.

For details, refer to the separate manual, “Device Driver Installation Guide,” 

that came with the CRW-70 drive.

Series A plug

USB port

USB cable 
(provided)