Yamaha AW4416 Manual Do Utilizador
Chapter12—Sampling pads
— Operation Guide
187
Assigning a region to a sampling pad
In order to use the pads to play samples, you must first assign the desired samples
to those pads. There are three ways to assign samples to pads.
to those pads. There are three ways to assign samples to pads.
1
Assign a desired region from tracks 1–16 of the recorder section
B
Import an audio CD track from an internal/external CD-RW drive
C
Import a WAV file from a SCSI device
As an example, here’s how to assign a region that was previously recorded on a
track.
track.
1. In the SAMPLING PAD section, press the [EDIT] pad → [F1] key.
The SAMP.PAD screen From Rgn. page will appear, allowing you to assign a
desired region to a pad. This page shows three buttons and the regions recorded
on each track.
desired region to a pad. This page shows three buttons and the regions recorded
on each track.
The three buttons have the following functions.
1
PAD SEL button
Selects the pad to which the region will be assigned.
B
RGN. SEL button
Selects the region.
C
EXECUTE button
Executes the assignment of the region to the pad.
1
2
3
2
3