Yamaha AW4416 Manual Do Utilizador

Edit the parameters of the effect 
that is selected for internal effect 1 
(AUX7/EFF1 screen) or external 
effect 2 (AUX8/EFF2).

• [AUX 7] key/[AUX 8] → [F1] (Eff. 

Edit) key

• Repeatedly press the [AUX 7] 

key or [AUX 8] key until the 
desired screen appears

M button → EFF 1 button/EFF 2 
button → Eff. Edit tab

A

If the effect is patched to AUX send/return this 
will indicate “AUX 7”/”AUX 8.” If the effect is 
patched to a specific channel this will indicate 
“INSERT.”

The choice of AUX send/return or insertion is 
made in the SET UP screen Patch IN page.

B

This button switches effect bypass on/off. This 
ON/OFF button can be switched by pressing the 
[ENTER] key regardless of where the cursor is 
located.

C

This shows the name of the currently used effect 
program.

D

This shows the name of the currently used effect 
type. A graphic indicating the effect type is also 
displayed as the right.

It is not possible to change the effect type in 
this page. If you wish to use a specific effect 
type, load a program using that effect type 
from the effect library (→ P.71).

E

This level meter shows the effect output level.

F

Use the knobs displayed in this area to edit the 
effect parameter values. The type of parameters 
will differ depending on the currently-used 
effect type.

3

5

7

1

2

4

6