Promise Technology M300i Manual Do Utilizador
Chapter 5: Management with the CLU
191
Network Management
Network Management deals with network connections and settings for VTrak’s
Management Port and, on iSCSI models, the iSCSI ports. The other parameters
specific to iSCSI, see “iSCSI Management” on page 195.
Management Port and, on iSCSI models, the iSCSI ports. The other parameters
specific to iSCSI, see “iSCSI Management” on page 195.
Management Port Settings
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight the management or iSCSI port you want and press Enter.
3.
Highlight NetMgmt Ethernet Port Settings and press Enter
The settings screen appears. You can enable DHCP or make settings
manually.
manually.
DHCP
If you enable DHCP, IP Address, Subnet Mask and Gateway are set
automatically.
automatically.
1.
Highlight DHCP and press the spacebar to toggle to Enabled.
2.
Press Ctrl-A to save your settings.
Manual
1.
Highlight DHCP and press the spacebar to toggle to Disabled.
2.
Highlight each of the following and press the backspace key to erase the
current value, then type the new value.
current value, then type the new value.
•
IP Address
•
Subnet Mask
•
Default Gateway IP Address
•
DNS Server IP Address
3.
Press Ctrl-A to save your settings.
iSCSI Port Settings
This feature applies to VTrak iSCSI models only.
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight the iSCSI port you want and press Enter.
3.
Highlight NetMgmt iSCSI Port Settings and press Enter.
The settings screen appears. You can enable DHCP or make settings
manually.
manually.