Promise Technology M300i Manual Do Utilizador

VTrak M-Class Product Manual

294

VTrak has an RJ-45 Management Port connector on the back of its cabinet. This 
is a Gigabit Ethernet connector designed to connect to your network. The VTrak 
becomes a node on your network like any other PC, server or other component 
with an IP address. 

VTrak ships from the factory an IP address of 10.0.0.1. You must change this 
address to one that will work with your network. You make the initial IP address 
setting using the CLI or CLU. See “VTrak Setup with CLI or CLU” on page 29. 

Note that VTrak Management Port can accept IP address assignments from a 
DHCP server. Use VTrak's Command Line Utility (CLU) to enable this feature. If 
you have not activated DHCP support but there is a DHCP server on your 
network, there is a chance that it will inadvertently assign the VTrak's 
Management Port IP address to another node. You might see a warning to this 
effect on your PC's monitor. If this happens, WebPAM PROe may not be able to 
connect. See your network administrator to work out a suitable arrangement.

Connectivity

10BaseT

1000BaseT

100BaseT

n/a

Activity

No activity

n/a

n/a

Activity

“n/a” means this state does not apply to this LED.

Connectivity LED

Activity LED