Promise Technology M300i Manual Do Utilizador
Chapter 4: Management with WebPAM PROe
83
•
Controller ID
•
Maximum number of ports supported
•
Number of ports present
•
Number of failed ports
•
Port ID
•
Port status (enabled or disabled)
•
Link status (up or down)
•
IP type
•
DHCP status (enabled or disabled)
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Primary MAC address
•
Maximum speed supported by this connection
•
TCP port number (3260 is the default)
To make changes to the Data Port settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the Network Management
icon.
4.
Click the Port 1 or Port 2 link in Management View.
5.
To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter the following:
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Enter a TCP port number (3260 is the default).
6.
Click the Submit button.
Fibre Channel Management
This feature pertains the VTrak Fibre Channel models, M500f, M300f, and M200f.
Fibre Channel Node
The Fibre Channel Management–Node tab enables you to see the current Data
Port settings on the Controller, including:
Port settings on the Controller, including:
•
Hardware Version