Ricoh PCI-to-PC Card Adapter Manual Do Utilizador

 

3 

manual for further information, if needed. 

1.  Turn OFF the power to your computer and any other connected 

peripheral devices.   

2.  Unplug the power cord from the back of the computer. 

3.  Remove your computer's cover. 

4.  Remove the slot bracket from an available PCI slot.   

5.  To install the card, carefully align the card's bus connector with the 

selected PCI slot on the motherboard. Push the board down firmly, but 
gently, until it is well seated.   

In Windows 98SE, you need to insert Windows OS CD you’re your 
CD-ROM drive and follow screen message to install this adapter. 

Your system will automatically detect and install this adapter under 
Windows ME/2000/XP.   

1.  After installing the board, boots up your system. 

2.  Insert the driver CD-title into your CD-ROM drive. 

3.  Double click d:\SETUP.exe (assume d: is your CD-ROM drive) and 

follow screen message to install this adapter   

4.  Remove the driver CD-title and restart the computer system to 

complete the installation.