Ricoh VG1398501 Manual Do Utilizador

Configuration

94

N

Press the {U} or {T} key to display [DHCP], and then press the {# Enter}
key.

O

Press the {U} or {T} key to display [On], and then press the {# Enter} key.

❒ “p ” shows the current setting.
❒ After about two seconds, the display returns to the network setup menu.

P

Select one of the items below if necessary.

• Auto Select (Default)

• Ethernet II

• Ethernet 802.2

• Ethernet 802.3

• Ethernet SNAP

❒ Usually, use the default setting (“Auto Select”). When you first select [Auto

Select], the frame type detected by the printer is adopted. If your network
can use more than two frame types, the printer may fail to select the correct
frame type if [Auto Select] is selected. In this case, select the appropriate
frame type.

Q

Press the {U} or {T} key to display [Frame Type (NW)], and then press the
{# Enter} key.

The current setting appears on the display.

R

Press the {U} or {T} key to display the frame type you want to use, and
then press the {# Enter} key.

  Network Setup:

   DHCP

  DHCP:

  *On

  Network Setup:

   Frame Type (NW)

  Frame Type (NW):

  *Auto Select