Ricoh VG1398501 Manual Do Utilizador

Configuration

Set [Trans. Speed] in the same way.

❒ The factory default is “Auto”. If you need to change the transmitting speed

depending on environment you are using, select the appropriate transmit-
ting speed.

If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set [SSID] to
use for transmission.

❒ Confirm the network administrator for SSID to use.
❒ SSID can also be set using a Web browser. For details, see the Web Image

Monitor Help, and “Configuring the Network Interface Board Using Web
Browser”, Software Guide.

Press the {U} or {T} key to display [SSID], and then press the {# Enter}
key.

The following message appears on the display.

If an SSID has been set, you can check the set SSID. Press the {# Enter} key.

Press the {U} or {T} key to display [Enter ID], and then press the {# Enter}
key.

The following message appears on the display.

The value in brackets at the upper right is the number of characters entered.

Press the {U} or {T} key to select characters, and then press the {# En-
ter} key.

You can now enter the next character.

Continue entering the key.

❒ The characters that can be used are ASCII 0x20-0x7e (32 bytes).
❒ To display the previous character, press the {Escape} key.

SSID:

View

SSID: [ 0]

SSID: [ 1]