IBM 19K5716 Manual Do Utilizador
98
IBM ISDN PC Card:User’s Guide
1. Create an Internet connection as described in “Creating a connection using
one B channel” on page 96 . Do not connect to your Internet Service Provider
upon completion, however. Instead, close the Dial-up Connection window,
and close Internet Explorer if it has been started.
upon completion, however. Instead, close the Dial-up Connection window,
and close Internet Explorer if it has been started.
In the Dial-up Networking window, right-click the entry you want to use to
create a multilink connection. In the context menu, select Properties.
create a multilink connection. In the context menu, select Properties.
2. On the General page in the properties window for the selected connection,
select the additional device you wish to use for the multilink Internet
connection from the list labeled Connect using. You can combine the
following devices to create a multilink connection:
connection from the list labeled Connect using. You can combine the
following devices to create a multilink connection:
•
cFos ISDN, Internet, Sync PPP over HDLC
•
cFos ISDN, Internet, add. Sync PPP over HDLC
•
IBM NDIS WAN CAPI Driver
Note:
You can add only one additional device to the dial-up connection.
Adding more than one additional device may cause the connection to
fail. Click the Settings button to the right of the connection.
Adding more than one additional device may cause the connection to
fail. Click the Settings button to the right of the connection.
3. Select the option All devices call the same numbers below the Connect using
list. To make sure that the phone number to dial has been stored, click the
Alternates
Alternates
button in the Phone number section.
ISDNmst.fm Page 98 Wednesday, January 15, 2003 9:22 AM