IBM 19K5716 Manual Do Utilizador
13. ISDN CAPI Port Device Driver
203
1. Open Start -> Settings -> Control Panel -> Modems (Windows NT) or Start -
> Settings -> Control Panel -> Telephone and Modem Options
(Windows
2000).
2. Select the desired modem (Windows 2000: on the "Modems" page).
3. Click the Properties button.
4. On the Settings page, click the Advanced... button (Windows 2000: Advanced
Options page).
5. Enter the AT command in the Extra Settings field.
If you want to set more than one register, separate each individual register
with semicolons followed by a space. Only the first command entered
requires the prefix ”AT”.
with semicolons followed by a space. Only the first command entered
requires the prefix ”AT”.
Example
: AT S31=2; S35=38400; S51=0
6. Confirm your entries by clicking OK and close the modem window.
AT Command
Value
Parameter
ATS0=
0
0=AUTOANSWER off
(default)
(default)
1
1=AUTOANSWER on
ATS2=
43
ASCII code for escape
sequence character
sequence character
ATS3=
13
Code for CR
ATS4=
10
Code for LF
ATS5=
8
Code for BS
ATS12=
100
Time interval for escape
sequence
sequence
ATS30=
Error Level:
0
No AT command; syntax,
illegal register value,
command not executed
illegal register value,
command not executed
1
Unknown command
parameter
parameter
2
Unknown command
ATS31=
0
Protocol: X.75 (default)
1
Protocol: HDLC
2
Protocol: V.110
3
Fax Group 3
4
Protocol: TEL
5
Protocol: X.25
ISDNmst.fm Page 203 Wednesday, January 15, 2003 9:22 AM