ONKYO HTP-240 Manual Do Utilizador

 

7

 

■

 

To mount the center speaker horizontally, use the two 
keyhole slots shown to hang each speaker on two screws 
that are securely screwed into the wall.

 

A mounting screw’s ability to support a speaker depends 
on how well it’s anchored to the wall. If you have hollow 
walls, screw each mounting screw into a stud. If there are 
no studs, or the walls are solid, use suitable wall anchors.
Use screws with a head diameter of 3/8 inch or less and 
a shank diameter of 1/8 inch (or 4 mm) or less (No. 8 or 
smaller). With hollow walls, use a cable/pipe detector to 
check for any power cables or water pipes before making 
any holes.
(We recommend that you consult a home installation 
professional.)

Optional Onkyo speaker stands (AS-240) are available 
for the front left and right and surround left and right 
speakers. To attach a speaker to a stand, align the mount-
ing holes in the stand with those on the speaker’s rear 
panel, and secure by using four of the supplied fixing 
screws.

Threaded inserts for 1/4-inch machine screws are pro-
vided on the rear of each speaker for wall-mounting with 
commercially available speaker mounts and brackets. 
Refer to the manual supplied with your mounts or brack-
ets for installation details.

 

The portion of the screw that goes into the speaker’s 
threaded insert should be between 1/5 and 3/8 of an inch 
long.

4-7/8"

7-9/16"

4-7/8"

2-9/16"

2-9/16"

Keyhole slots for horizontal 
wall mounting

Spacers

Spacers

Use this hole if mounting 
vertically

Use this hole if mounting 
horizontally

1/4"

1/5"–3/8"

Mount or bracket

HTP-240.fm Page 7 Wednesday, December 3, 2003 9:30 AM