Motorola SB4220 Manual Do Utilizador
4
SURFboard Cable Modem SB4220 Series User Guide
X
Print
Exit
License
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard cable modem:
SURFboard cable modem:
You will need 75-ohm
with F-type connectors to connect your cable
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
need a 5-900 MHz RF
and two additional coaxial cables to use both the TV and
the cable modem. The coaxial cable and RF splitter are available at consumer electronic
stores. To connect your SB4220 to an Ethernet hub as described in
stores. To connect your SB4220 to an Ethernet hub as described in
on page 33, you may need a crossover cable. Check the documentation provided
with your hub.
Item
Description
Power cord
Connects the SURFboard cable modem to the AC
electrical outlet
electrical outlet
10/100Base-T
Ethernet cable
Ethernet cable
Connects to the
port
USB cable
Connects to the
port
SURFboard Cable
Modem CD-ROM
Modem CD-ROM
Contains the User Guide and USB drivers