Keyspan 1.9 Manual Do Utilizador

Prior to using your serial device (modem,UPS, etc.) with the Keyspan High Speed USB Serial 
Adapter, you must:

1. connect your serial device (hardware) to the Keyspan port
2. configure your serial device's software to use the Keyspan port

The following instructions provide a general overview of this process however we do provide 
specific configuration instructions for certain serial devices.   For a list of these examples, please 
read the 

If your Keyspan adapter is not connected, please do so NOW. 

 - 

Connect Your Serial Device To The Keyspan Adapter 

Attach your serial device's (ie Palm cradle, GPS, cell phone) serial cable to the serial port on your 
Keyspan High Speed USB Serial Adapter.

 - 

Determine Which Keyspan Port Your Serial Device Is Connected To

If your have a Keyspan product that has more than one serial port, please note which Keyspan 
serial port your serial device is connected to (the serial port on the Keyspan product, not your USB 
ports on your computer or USB hub). This information will become useful as we start Configuring 
Your Serial Device's Software. 

 

The following configuration instructions provide a basic overview of how to configure your 
software to use your Keyspan serial port(s). For specific instructions on how to operate your serial 
device, please refer to your serial device's user's manual for detailed instructions...

This User Manual applies to the Keyspan High Speed USB Serial Adapter Software  for Mac OS. 

(rev 02may12JA) 

Page 7