Adder Technology 1000 Manual Do Utilizador

One user can be placed a maximum of 300 
metres (980 feet) from the AdderView CATx 
1000 unit. The remote user is connected via 
an Adder X100 or X200 extender module and 
suitable category 5, 5e or 6 cabling (with no 
crossover).
Note: It is not possible to connect a remote 
user while the unit is cascaded to another unit. 

Overall maximum length between the remote user and

any host system must not exceed 300 metres (980 feet)

300 metres (980 feet)

maximum

10 metres

(32 feet)

maximum

In situations where any computer system will be placed a significant distance 
from the AdderView CATx 1000 unit, ensure that the distance to any remote 
user is similarly less than 300 metres (980 feet).    
To connect a remote user

1  Place an Adder X100 or X200 extender unit adjacent to the remote user 

location. 

2  Attach the video monitor, 

keyboard, mouse, power adapter 
(and speaker) connectors to the 
sockets of the Adder 
X100 or X200 
module.

3  Lay a suitable length of category 5, 5e or 6 cabling between the Adder 

X100/X200 module and the AdderView CATx 1000 unit. Please refer to the 
section Cable lengths for remote user locations opposite.

4  Attach the connector of the cable run to the socket of the Adder X100/X200.

5  At the other end of the cable run, attach the cable connector to the socket 

on the front panel of the AdderView CATx 1000 unit. 

6  Where necessary, use the in-built video compensation feature of the Adder 

X100/X200 module to eliminate any effects caused by the cable run.    

Cable lengths for remote user locations
The maximum length of cable between the remote user and the AdderView 
CATx 1000 unit can be up to 300 metres (980 feet). However, bear in mind that 
the overall distance between the remote user and any computer system must 
not exceed 300 metres (980 feet).