Digi 90031300 Manual Do Utilizador
T1 Modem Bank
10
T1 Modem Bank Standalone or Rack Installation
You have the option of using the T1 Modem Bank in a standalone, table-top configuration or in a rack-mounted
configuration. Directions for both configurations are provided in this section.
configuration. Directions for both configurations are provided in this section.
•
Make sure the T1 Modem Bank is powered-down before you install it.
•
Do not block the sides of the T1 Modem Bank since this will impede airflow.
•
The T1 Modem Bank is shipped from the factory with four “feet” installed on the bottom of
the unit. If you remove the feet, you must ensure that the T1 Modem Bank will have at least
1U (1.75 inches) of clearance beneath it in order to prevent airflow from being impeded.
the unit. If you remove the feet, you must ensure that the T1 Modem Bank will have at least
1U (1.75 inches) of clearance beneath it in order to prevent airflow from being impeded.