Digi 90031300 Manual Do Utilizador
Software Installation
41
T1 Modem Bank Configuration
The T1 Modem Bank can be configured in the field for specific network needs by one of four methods:
•
QuickManager mode
•
DGT1CFG.NLM mode (used on Novell systems only). See “Configuring the T1 Modem Banks” on page 36
for instructions on using the DGT1CFG.NLM utility.
for instructions on using the DGT1CFG.NLM utility.
•
terminal port mode
•
display panel mode
It is easier and less time-consuming to configure a T1 Modem Bank using QuickManager or DGT1CFG.NLM than
to use the terminal port or the display panel. In addition, QuickManager can perform management functions like
advanced configuration, monitoring, and testing.
to use the terminal port or the display panel. In addition, QuickManager can perform management functions like
advanced configuration, monitoring, and testing.
Configuring via QuickManager
QuickManager is started by clicking the “Digi” program group, and then clicking the QuickManager icon. (Clicking
the ConfigWizard icon in the “Digi” program group allows you to initially configure the T1 Modem Banks, but
ConfigWizard does not perform the management functions that QuickManager does). Clicking “Window” in the
main menu will allow you to view the current configuration settings, change the configuration settings, or run a test
on the selected component. (You can alternatively click the applicable button below the main menu). Figure 19
shows an example screen for the status of a line card.
the ConfigWizard icon in the “Digi” program group allows you to initially configure the T1 Modem Banks, but
ConfigWizard does not perform the management functions that QuickManager does). Clicking “Window” in the
main menu will allow you to view the current configuration settings, change the configuration settings, or run a test
on the selected component. (You can alternatively click the applicable button below the main menu). Figure 19
shows an example screen for the status of a line card.