Digi 90031300 Manual Do Utilizador
Physical Specifications
79
Physical Specifications
T1 Modem Bank Power Cord Specifications
The chassis has a 3-wire power cord. The free end of the 3-wire power cord connects to the 110 VAC (domestic)
power source and protective ground. NEMA plug type 5/15P is used for US installations.
power source and protective ground. NEMA plug type 5/15P is used for US installations.
The North American cordset is rated 15A/125V, and is UL/CSA approved.
A T1 Modem Bank sold in North America is shipped with a standard power cord. Units sold
outside of North America are shipped without a power cord. If the power cord needs to be
replaced, or if you need to purchase an original power cord, use only a cord that meets the
following specifications:
outside of North America are shipped without a power cord. If the power cord needs to be
replaced, or if you need to purchase an original power cord, use only a cord that meets the
following specifications:
Type:
SJT or SVT flexible power cord, compatible with an IEC320 appliance inlet.
Safety Approvals:
The cord must bear the mark of the agency in your country (such as UL, CSA, VDE,
SEMKO, and so on).
SEMKO, and so on).
Temperature Rating:
75°C minimum
Voltage Rating:
125 Volts minimum (North America)
Current Rating:
15 Amps maximum
Conductor Size:
3 x 18 AWG or 3 x 0.75 mm, or larger
For power cord selection in Germany, use only a H05VV-F, <HAR>, VDE, PVC, 3 x 0.75mm
power cord.
power cord.
Für gebrauch in Deutschland muß ein Netzkabel des typs H05VV-F, <HAR>, größe, 3 x
0.75mm verwendet werden.
0.75mm verwendet werden.