Adtran Express XL Manual Do Utilizador
Chapter 3: Terminal Menu Operation and Structure
36
Express XL/XLT User Manual
61200070L1-1
Configuration/WAN
The WAN menu is used to set up the ISDN parameters for the Express XL/
XLT. Also, for the Express XLT, a POTS menu is provided. Figure 3-3 shows
the WAN menu.
XLT. Also, for the Express XLT, a POTS menu is provided. Figure 3-3 shows
the WAN menu.
Figure 3-3
Configuration/WAN Screen
WAN/ISDN
Write security: 2; Read security: 5
Selects the mode the ISDN line is in. If connecting to the public network, select
Dial
Selects the mode the ISDN line is in. If connecting to the public network, select
Dial
(def). If connecting to a leased wire for back-to-back operation, select
Leased
.
ISDN/Dial Line
Dial Line parameters are entered under this menu.
Dial Line/ExpertISDN
Write security: 2; Read security: 5
The ExpertISDN option allows automatic determination of Service Profile
Identifier (SPID) 1 and SPID 2 with entry of the Local Directory Number(s)
(LDN(s)) and area code. Enter the 7-digit LDN in LDN 1 and LDN 2 (if a sec-
ond number exists). The area code must be entered. The message Auto Spid
Success
The ExpertISDN option allows automatic determination of Service Profile
Identifier (SPID) 1 and SPID 2 with entry of the Local Directory Number(s)
(LDN(s)) and area code. Enter the 7-digit LDN in LDN 1 and LDN 2 (if a sec-
ond number exists). The area code must be entered. The message Auto Spid
Success
will appear in the Call Log to indicate success in determining the
SPID. See Appendix B on page 121 for additional messages and their definitions.