Adtran Express XL Manual Do Utilizador

Chapter 3: Terminal Menu Operation and Structure

Express XL/XLT User Manual

61200070L1-1

Write security: 2; Read security: 5
This is the network address of the virtual Ethernet port.  See IPX/Network on 
page 47 for explanation of the IPX network number.

Write security: 2; Read security: 5
This is the frame type used for the virtual Ethernet port.  See IPX/Frame Type 
on page 48 for an explanation of the IPX frame type.

Write security: 2; Read security: 5
This is the seed status used for the virtual Ethernet port.  See IPX/Seed Status 
on page 48 menu for an explanation of the IPX seed status.

Write security: 2; Read security: 5
When set to Yes, only IPX RIP and SAP updates are sent when the routing or 
service table has changed.  When set to No (def), updates are sent at the same 
rate set for the Ethernet port (see IPX/RIP Timer on page 48 and IPX/SAP Timer 
on page 49).

The Spanning Tree Algorithm and Protocol ensures a loop-free topology and 
provides redundancy.  The protocol parameters can be specifically tuned from 
their defaults, though most applications require no adjustment.

Write security: 2; Read security: 5
When the mode is set to On, the Express XL/XLT will participate in the span-
ning tree protocol between other bridges.  When Off (def), all bridge ports re-
main permanently open for forwarding.