Adtran Express XL Manual Do Utilizador
Chapter 3: Terminal Menu Operation and Structure
61200070L1-1
Express XL/XLT User Manual
63
Configuration/Connection List
The Express XL/XLT uses the Connection List to specify the profile each user
or group of users are to have when connected. Each profile or item in the Con-
nection List has many configurable parameters giving high flexibility on a per
user basis.
or group of users are to have when connected. Each profile or item in the Con-
nection List has many configurable parameters giving high flexibility on a per
user basis.
Up to 15 profiles can be defined in the Connection List. Calls cannot be origi-
nated or answered unless a Connection List profile is defined. The Express
XL/XLT factory defaults with one profile called DEFAULT. This profile is
used for any incoming calls when Configuration/Security/Authentication =
None
nated or answered unless a Connection List profile is defined. The Express
XL/XLT factory defaults with one profile called DEFAULT. This profile is
used for any incoming calls when Configuration/Security/Authentication =
None
or when the username of the connecting PPP peer is not found in the
Connection List.
To insert a new profile, press the I key when over the Num column. A new inserted
profile will always be set up with the default parameters. To copy parameters from an
old profile to this newly inserted profile, use the copy (C) and paste (P) keys. Entire
configuration trees can be copied with this method.
profile will always be set up with the default parameters. To copy parameters from an
old profile to this newly inserted profile, use the copy (C) and paste (P) keys. Entire
configuration trees can be copied with this method.
Figure 3-8 shows the Connection List menu.
Figure 3-8
Configuration/Connection List Screen