Adtran L128T Manual Do Utilizador

 

Quick Startup Guide

 

Express L128/L128T User Manual

61202.070L1-1

 

1.

Connect the 10BaseT cable from the PC’s network card to the Express 
L128/L128T.   Select 

 

 on the Express L128/L128T back panel.

2.

Go to the 

 

 menu, and then press the right 

arrow key to place the cursor on the 

 

 column.

3.

Type 

 

 to insert a new Connection List entry.

4.

Using the arrow keys, move the cursor over the 

 

 column for the in-

serted entry. Press 

 

 to place the subentries into the right pane.

5.

Set the 

 

 to an identifiable name (i.e., ISP).

6.

Go into the 

 

 field and select 

 

 for the 

 

.

7.

Enter your user name and password (provided by your ISP) into the 

 

 and 

 

 fields.

8.

Move the cursor to the left pane and highlight the IP parameters.

9.

Set the 

 

 item to 

 

. This is a very important step. The Express L128/

L128T will need to translate the “fake” IP address(es) on the PC(s) to the 
“real” address provided dynamically by the ISP. See 

 

 on page 43 

for more details.

10. All other IP parameters should be left at their default settings. Navigate 

over to the 

 

 parameters.

11. Enter the number into 

 

. If configured for two B-channel (PPP 

Multilink) by the ISP, enter 

 

 if it exists and set 

 

 

to 

 

.

12. Arrow left until the message 

 

 appears. 

Type 

 

 to save.

13. Go to the 

 

menu

 

and enter an IP address and net mask 

into the 

 

 and 

 

 fields. The factory default setting 

will work just as well (10.0.0.1, 255.255.255.0).

14. Go into the 

 

submenu and set 

 

 

 

 to 

 

.

15. Arrow left to save the configuration.
16. Go into the 

 

menu.

17. Set the cursor over the 

 

parameter for the Connection List profile you 

just set up.

18. Press 

 

; the Express L128/L128T will start dialing.