Adtran L128T Manual Do Utilizador
Chapter 3: Terminal Menu Operation and Structure
61202.070L1-1
Express L128/L128T User Manual
53
Spanning Tree/Priority
Write security: 2; Read security: 5
This assigns a priority to the Express L128/L128T that permits the relative pri-
ority of multiple bridges to be managed. The range is 0 to 65535 with a default
of 32768.
This assigns a priority to the Express L128/L128T that permits the relative pri-
ority of multiple bridges to be managed. The range is 0 to 65535 with a default
of 32768.
Spanning Tree/Maximum Age
Write security: 2; Read security: 5
This is the timeout value used by the Express L128/L128T to test against the
root device. The value is in one-tenth seconds with a range between 60 (6.0
seconds) and 400 (40.0 seconds). The default is 200 (20.0 seconds).
This is the timeout value used by the Express L128/L128T to test against the
root device. The value is in one-tenth seconds with a range between 60 (6.0
seconds) and 400 (40.0 seconds). The default is 200 (20.0 seconds).
Spanning Tree/Hello Time
Write security: 2; Read security: 5
This is the time between the generation of configuration BPDUs (Bridging Pro-
tocol Data Units) by the root bridge. The value is in one-tenth seconds with a
range between 10 (1.0 second) and 100 (10.0 seconds). The default is 20 (2.0
seconds).
This is the time between the generation of configuration BPDUs (Bridging Pro-
tocol Data Units) by the root bridge. The value is in one-tenth seconds with a
range between 10 (1.0 second) and 100 (10.0 seconds). The default is 20 (2.0
seconds).
Spanning Tree/Forward Delay
Write security: 2; Read security: 5
This is the time spent in the listening and learning state while moving from the
blocking state to the forwarding state. The value is in one-tenth seconds with
a range between 40 (4.0 seconds) and 300 (30.0 seconds). The default is 150
(15.0 seconds).
This is the time spent in the listening and learning state while moving from the
blocking state to the forwarding state. The value is in one-tenth seconds with
a range between 40 (4.0 seconds) and 300 (30.0 seconds). The default is 150
(15.0 seconds).
Spanning Tree/LAN Port
The path cost and priority parameters for the Ethernet port are specified under
this menu.
this menu.
LAN Port/Active
Write security: 2; Read security: 5
The Ethernet port can be disabled when set to No. In this mode, no bridge traf-
fic will be forwarded in or out. Setting to Yes (def) allows the port to partici-
pate in the spanning tree topology.
The Ethernet port can be disabled when set to No. In this mode, no bridge traf-
fic will be forwarded in or out. Setting to Yes (def) allows the port to partici-
pate in the spanning tree topology.