Lucent Technologies PortMaster Manual Do Utilizador

You can display the current users in the user table or the complete configuration 
information for a specified user.

To display the current users in the user table, for example, enter the following 
command:

Command> show table user 

Name

Type

Address/Host

Netmask/Service RIP

---------------------------------------------------------------------------
jozef

Netuser

negotiated

0000000000

adele

Login User

default

Telnet

elena

Netuser

assigned

255.255.255.255 No

taffy

Login User

defaults

PortMaster

john

Netuser

192.168.7.8

0000000000

No

To display configuration information for a particular user, for example, use the following 
command:

Command> show user elena

Username:

elena

Type:

Dial-in Network User

Address:

Assigned

Netmask:

255.255.255.255

Protocol:

PPP

Options:

Quiet, compressed

MTU:

1500

Async Map:

00000000

You must add users to the user table before configuring any settings for them. The 
username is a string of from 1 to 8 printable, nonspace ASCII characters. The optional 
user password is a string of from 0 to 16 printable ASCII characters. You cannot add 
users with blank usernames. 

To add a login user to the user table, use the following command:

Command> add user Username [password Password]

To add a network user to the user table, use the following command:

Command> add netuser Username [password Password]