Lucent Technologies PortMaster Manual Do Utilizador

Simple network management protocol (SNMP) monitoring is used to set and collect 
information on SNMP-capable devices. This feature is most often used to monitor 
network statistics such as usage and error rate. 

If SNMP monitoring is on, the PortMaster accepts SNMP queries. If SNMP monitoring is 
off, all SNMP queries are ignored.

To turn SNMP monitoring on or off, use the following commands:

Command> set snmp on|off
Command> save all
Command> reboot

Community strings allow you to control access to the MIB information on selected 
SNMP devices. The read and write community strings act like passwords to permit access 
to the SNMP agent information. The read community string must be known by any 
device allowed to access or read the MIB information. The default read community 
string is public. The write community string must be known by any device before 

livingstonModemInByteCount

Total number of bytes received by the modem

livingstonModemOutByteCount

Total number of bytes transmitted by the 
modem

livingstonModemRetrains

Number of retrains attempted by the modem

livingstonModemRenegotiates 

Number of renegotiates attempted by the 
modem

livingstonModemCalls

Number of times a call received by the modem

livingstonModemDetects

Number of analog calls received by the modem

livingstonModemConnects

Number of successful calls received by the 
modem

Modem Table (Continued)