MicroNet Technology SP916GK Manual Do Utilizador
-
5
-
5
2. Installing and Using Wireless Router
This Chapter provides a step-by-step guide to the installation and configuration of
the Wireless Router. We suggest you go over the whole chapter before doing more
advanced operation.
the Wireless Router. We suggest you go over the whole chapter before doing more
advanced operation.
2.1 Network configuration setup
Steps to build up the network:
Step1. Connect the ADSL or Cable modem to the Ethernet WAN port on the back of
the Wireless Router by using the UTP cable.
Step2. Connect the phone line from the wall socket to the line-in port on the ADSL
modem, or the coaxial cable to the line-in port on the Cable modem.
Step3. Plug in the power adapter to the modem and turn on the power. Install the
Ethernet card into the computer by referring to the User Guide that came with
the card.
the card.
Step4. Connect the computer to the Wireless Router by using standard twisted-pair
Ethernet cable from the computer’s Ethernet card to a 10/100Mbps Ethernet
port on the back of the Wireless Router.
port on the back of the Wireless Router.
Step5. Plug in the power adapter to the Router and the other side to the wall outlet.
2.2 Computer configuration setup
In order to communicate with this Wireless Router, you have to configure the IP
addresses of your computer to be compatible with the device. The router supports
DHCP server, which is enabled as default. Users using “Obtain an IP address
automatically” to configure IP address may skip the following IP configuration
instruction section.
addresses of your computer to be compatible with the device. The router supports
DHCP server, which is enabled as default. Users using “Obtain an IP address
automatically” to configure IP address may skip the following IP configuration
instruction section.
Note:
1.
The default network setting of the device:
IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Server: enabled
2.
In the following TCP/IP configuration guide, the IP address “192.168.1.2 ” is
assumed to be your IP address if you want to specify IP addresses manually.
Please DO NOT use 192.168.1.1 as the IP address for 192.168.1.1 has been set
as the default IP for this device.
assumed to be your IP address if you want to specify IP addresses manually.
Please DO NOT use 192.168.1.1 as the IP address for 192.168.1.1 has been set
as the default IP for this device.
3.
The following TCP/IP configuration guide uses Windows XP as the presumed
operation system.
operation system.
Procedures to configure IP addresses for your computer
1.
If you are in Classic Start menu view, click Start
ÆSettingsÆControl
Panel
ÆNetwork Connections.