Adtran 1200305L1 Manual Do Utilizador

ATLAS 550 System Manual

Section 4, User Interface Guide

61200305L1-1F

© 2002 ADTRAN, Inc.

103

Displays the type of module actually installed in the slot or the type of module you plan to install in the 
slot. The ATLAS 550 controller automatically detects the type of module installed in each slot, and the 

 field automatically defaults to the installed module type. You can also use this field to preconfigure a 

unit before actually installing modules by specifying the module that you want to install in each slot.

To use this option, navigate to the field you want to edit and press <Enter>. For empty slots, a list of all the 
available module types displays. Select the one you want and it displays in the 

 field. If this field is 

already configured with a module, you can only set this field to 

. To change from one module type to 

another, you must first set the field to 

.

Displays additional status and configuration menus for the ATLAS 550 controller or selected module. To 
access the submenus for this item, use the arrow keys to scroll to the 

 column for the module you 

want to edit, and press <Enter>. For detailed information on each submenu item for a particular module, 
refer to the modules menus discussion for the appropriate option or resource module.

Displays whether there is an alarm condition on the ATLAS 550 controller or selected module. Press 
<Enter> to access the 

 menu. For detailed information on each submenu item for a particular 

module, refer to the following sections for the appropriate option or resource module alarm menu 
discussions.

Displays whether the ATLAS 550 controller or selected module is executing a test. Press <Enter> to access 
the 

menu. This option will allow you to set up and initiate tests. You may also access this menu 

through the 

submenu on this screen. For detailed information on each submenu item for a particular 

module, refer to the 

 sections for the appropriate option or resource module test menu discussions.

Displays whether the ATLAS 550 controller or selected module is online or offline. Even though a module 
is physically installed, it must be marked 

 for it to be considered an available resource. This 

parameter allows an installed module to be marked 

, which may be useful in system 

troubleshooting. If you choose 

, the module will not be in alarm condition, but will display 

. While in 

 the 

 LED will flash green. A module will automatically change to the 

state when installed.