Adtran 1200305L1 Manual Do Utilizador
Section 4, User Interface Guide
ATLAS 550 System Manual
148
© 2002 ADTRAN, Inc.
61200305L1-1F
M
ODULES
(ST-BRI-4) > A
LARMS
> A
LARMS
Write security: 5; Read security: 5
Displays the current alarm status of each Basic Rate ISDN (BRI) S/T interface.
M
ODULES
(ST-BRI-4) > A
LARMS
> C
HANNEL
Write security: 5; Read security: 5
Displays the alarm status of the bearer (B) channels and the datalink (D) channel. A hyphen (
–
) indicates
no active channel alarm and
D
indicates an active D channel alarm.
M
ODULES
(ST-BRI-4) > C
HANNEL
U
SAGE
Read security: 5
Displays the channel status of the bearer (B) channels and the datalink (D) channel for each Basic Rate
ISDN (BRI) S/T interface.
ISDN (BRI) S/T interface.
M
ODULES
(ST-BRI-4) > C
HANNEL
U
SAGE
> P
RT
Write security: 5; Read security: 5
Indicates the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
M
ODULES
(ST-BRI-4) > C
HANNEL
U
SAGE
> C
HA
Write security: 5; Read security: 5
(Channel) Displays the status of individual channels. The following symbols may display:
M
ODULES
(ST-BRI-4) > C
ONFIGURATION
Write security: 5; Read security: 5
Allows the user to personally identify each port with an appropriate name.
M
ODULES
(ST-BRI-4) > C
ONFIGURATION
> P
RT
Write security: 5; Read security: 5
Displays the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
M
ODULES
(ST-BRI-4) > C
ONFIGURATION
> P
ORT
N
AME
Write security: 3; Read security: 5
Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each port on the Octal BRI
L1 D
OWN
A layer one alarm is indicated by an asterisk (*) when the BRI S/T
physical layer is not active. An L1 alarm is present when problems are
detected with the endpoint or a cabling problem.
physical layer is not active. An L1 alarm is present when problems are
detected with the endpoint or a cabling problem.
-
Unallocated channel
.
Inactive channel
A
Active B channel
D
Active D channel