McDATA 3000 Manual Do Utilizador

 

Basic hardware (serial port, PCI, network) 

initialization

 

failed

Kernel configuration failed

Instruction cache enabling failed

Kernel root task creation failed

Memory pool initialization failed

MMU initialization failed

System timer initialization failed

Console initialization failed

Filesystem initialization failed

Real-time clock initialization failed

I2C initialization failed

Disk initialization failed

Network initialization failed

Misc. failures

System symbol table creation failed

Misc library initialization failed

Script running failure

Shell initialization failure

Kernel ok

Network protocol initialization failed

unused

Can't load network config info from NVRAM or 

BOOTP failure.
V031-V037

Network stack setup failed

unused

Kernel ok

The following section provides basic troubleshooting steps for your 
UltraNet Edge 3000’s FC/SCSI Tape Pipelining (Device Extension) 
network. 

This section is not intended to be an exhaustive troubleshooting 
guide for FC/SCSI Tape Pipelining, also called Device Extension, but 
provides basic steps to provide visibility from the tape device(s) to 
the server. This section assumes the user has some SCSI experience.

Tuning Veritas NetBackup or Tivoli Storage Manager may result in 

higher throughput through the UltraNet Edge 3000. If you need assistance 
with application tuning, contact McDATA Advanced Services.