McDATA 3000 Manual Do Utilizador

1. Ensure that compression is enabled on the circuit before enabling 

this part of the feature.

2. Double-click the circuit 

 to open the Circuit Parameters 

dialog box.

3. Click the Advanced tab.

4. Select the Enable Transport CRC for all data option to enable 

CRC checking for all data passing through the circuit.

5. Click OK.

The E_port Disk Streaming function is disabled by default. When 
your network has been configured, you can verify the settings for 
E_port Disk Streaming on the Advanced Tab of the Fibre Channel 
interface screen. 

Use the following procedure to verify and change your E_port Disk 
Streaming setting once your network has been configured:

1. Double-click the Fibre Channel interface 

 in the Network 

Map.