Adtran 4120 Manual Do Utilizador
Appendix E. Terminal Mode Commands
E-4
Express 4110/4120 User Manual
61200176L3-1
Additional Commands
Other commands available from the terminal mode are given below:
Download/Uploading Configuration
The Express 4110/4120’s configuration can be captured to a text file using
the download command. The text file can be edited if required. Upload
of the configuration can be accomplished by sending the text file to the
Express 4110/4120 in terminal mode. A baud rate of 9600 is strongly rec-
ommended when uploading. As soon as the upload has been completed,
type “save” to save the new configuration to flash. A “reset” command or
power cycle 10 seconds after the save command is recommended to
ensure that the new configuration is complete.
the download command. The text file can be edited if required. Upload
of the configuration can be accomplished by sending the text file to the
Express 4110/4120 in terminal mode. A baud rate of 9600 is strongly rec-
ommended when uploading. As soon as the upload has been completed,
type “save” to save the new configuration to flash. A “reset” command or
power cycle 10 seconds after the save command is recommended to
ensure that the new configuration is complete.
save
Saves the configuration to non-volatile RAM (flash).
mac
Returns the MAC address for the Express 4110/4120.
version
Returns the firmware version and routing stack version.
reset
Resets the unit.
exit
Leaves terminal mode and returns to menus.
download
Downloads complete configuration to the terminal screen for
capture.
capture.