Netgear WGR614 v5 Manual Do Utilizador

Wireless Configuration

4-7

When you first receive your WGR614 v5, the default factory settings are shown below. You can 
restore these defaults with the Factory Default Restore button on the rear panel. After you install 
the WGR614 v5 router, use the procedures below to customize any of the settings to better meet 
your networking needs.

Follow the instructions below to set up and test basic wireless connectivity. Once you have 
established basic wireless connectivity, you can enable security settings appropriate to your needs.

1.

Log in to the WGR614 v5 firewall at its default LAN address of 

 

with its default user name of admin and default password of password, or using whatever 
LAN address and password you have set up.

Wireless Access Point

Wireless Access List (MAC Filtering)

SSID broadcast 

SSID 

11b/g RF Channel

Mode

Authentication Type

WEP

If you use a wireless computer to configure WPA settings, you will be 

disconnected when you click Apply. Reconfigure your wireless adapter to match the 
new settings or access the wireless router from a wired computer to make any further 
changes.