Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netopia
  4. 2200
  5. Manual Do Utilizador

Netopia 2200 Manual Do Utilizador

Download
Página de 351
201
Status Indicator Lights
LED Function Summary Matrix
If a status indicator light does not look correct, look for these possible problems: 
Unlit
Solid Green
Flashing 
Green
Solid Red
Power
No power
Power on
N/A
System failure
USB Active
No signal
USB por t con-
nected to PC
Activity on the 
USB cable
N/A
DSL Sync
No signal
DSL line synched 
with the DSLAM
Attempting to 
train with DSLAM
N/A
DSL Traffic
No signal
N/A
Activity on the 
DSL cable
N/A
Ethernet 
Traffic
No signal
N/A
Activity on the 
Ethernet cable
N/A
Ethernet Link
No signal
Synched with Ether-
net card
N/A
N/A
Internet
No signal
Broadband device 
is connected. 
Activity on the 
WAN por t.
Physical link estab-
lished, but PPP or 
DHCP fails.
LED
State
Possible problems
Power
Unlit
1.
Make sure the power switch is in the ON position.
2.
Make sure the power adapter is plugged into the 2200- and 3300-series 
DSL Gateway properly.
3.
Tr y a known good wall outlet.
4.
Replace the power supply and/or unit.
DSL 
Sync
Unlit
1.
Make sure the you are using the correct cable. The DSL cable is the thin-
ner standard telephone cable.
2.
Make sure the DSL cable is plugged into the correct wall jack.
3.
Make sure the DSL cable is plugged into the DSL por t on the 2200- and 
3300-series DSL Gateway.
4.
Make sure the DSL line has been activated at the central office DSLAM.
5.
Make sure the 2200- and 3300-series DSL Gateway is not plugged into 
a micro filter.