Netopia 2200 Manual Do Utilizador

226

The only commands you cannot truncate are 

 and 

. To prevent accidental 

interruption of communications, you must enter the 

 and 

commands in their 

entirety.

You can use the Up and Down arrow keys to scroll backward and for ward through recent 
commands you have entered. Alternatively, you can use the 

 command to repeat the last 

command you entered. 

Sends an Address Resolution Protocol (ARP) request to match the nnn.nnn.nnn.nnn IP 
address to an Ethernet hardware address.

Clears the configuration settings in a Netopia Gateway. If you do not use the optional 

 

qualifier, you are prompted to confirm the 

 command.

Removes an SSL cer tificate that has been installed.

Erases the log information stored in flash if persistent logging is enabled.

Puts the command line inter face into Configure mode, which lets you configure your Neto-
pia Gateway with Config commands. Config commands are described star ting on 

page 

.