Netgear WNDAP620 Manual Do Utilizador

Configure RADIUS Server Settings

For authentication, accounting, or both authentication and accounting using RADIUS, you 
need to configure primary servers and optional secondary servers. These RADIUS server 
settings can apply to all devices that are connected to the wireless access point. 

You can configure both IPv4 and IPv6 servers. In the IPv4 Radius Server Settings section, 
enter IPv4 addresses only; in the IPv6 Radius Server Settings section, enter IPv6 addresses 
only.

Data Encryption

TKIP

Temporal Key Integrity Protocol (TKIP) is the standard encryption method 
used with WPA. You can also use TKIP with WPA2.

TKIP provides only legacy (slower) rates of operation. NETGEAR 

recommends WPA2 authentication with AES encryption if you want to use the 
11n rates and speed. 

AES

Advanced Encryption Standard (AES) is the standard encryption method used 
with WPA2.

Although some wireless clients might support AES with WPA, the 

WNDAP620 wireless access point does not support WPA with AES.

TKIP + AES TKIP + AES supports both WPA and WPA2. Broadcast packets use TKIP. For 

unicast (point-to-point) transmissions, WPA clients use TKIP, and WPA2 
clients use AES.

For the WPA & WPA2 mixed mode, TKIP + AES is the only supported data 
encryption method.

Passphrase

Enter a passphrase. The passphrase length needs to be between 8 and 63 characters 
(inclusive). The default passphrase is sharedsecret.

You can display the actual passphrase by selecting the Show Passphrase in Clear Text 
Yes radio button. 

Show Passphrase 
in Clear Text

Select the Yes radio button to display the actual passphrase in the Passphrase field. The 
default setting is No.