Netgear WNDAP620 Manual Do Utilizador

Enter the login name and password (admin and password are the defaults). 

After successful login, the > prompt appears, preceded by the name of the wireless 
access point. In this example, the prompt is netgear334408. 

Enter the CLI commands that you want to use. You can enter show configuration to 
display the available CLI commands. The CLI commands are also listed in 

.

You can also access the wireless access point remotely over a 
Telnet or SSH session using an application such as PuTTY, if such 
an encryption application is allowed by law in your country. After you 
have connected to the wireless access point, enter the login name 
and password to access the CLI.

Upgrade the Wireless Access Point Software 

The software of the wireless access point is stored in flash memory and can be upgraded as 
NETGEAR releases new software. You can download upgrade files from the NETGEAR 
website. If the upgrade file is compressed (.zip file), you first need to extract the image (.rmt) 
file before sending it to the wireless access point. You can send the upgrade file using your 
browser. There are two methods to perform a software upgrade that are described in the 
following sections:

The web browser that you use to upload new firmware into the 
wireless access point needs to support HTTP uploads. Use a 
browser such as Microsoft Internet Explorer 6.0 or later or Mozilla 
1.5 or later.